ikan Uploader :
Directory : /usr/include/video/
Upload File : |
| Current File : //usr/include/video/sisfb.h |
/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
* sisfb.h - definitions for the SiS framebuffer driver
*
* Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the named License,
* or any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#ifndef _LINUX_SISFB_H_
#define _LINUX_SISFB_H_
#include <linux/types.h>
#include <asm/ioctl.h>
/**********************************************/
/* PUBLIC */
/**********************************************/
/* vbflags, public (others in sis.h) */
#define CRT2_DEFAULT 0x00000001
#define CRT2_LCD 0x00000002
#define CRT2_TV 0x00000004
#define CRT2_VGA 0x00000008
#define TV_NTSC 0x00000010
#define TV_PAL 0x00000020
#define TV_HIVISION 0x00000040
#define TV_YPBPR 0x00000080
#define TV_AVIDEO 0x00000100
#define TV_SVIDEO 0x00000200
#define TV_SCART 0x00000400
#define TV_PALM 0x00001000
#define TV_PALN 0x00002000
#define TV_NTSCJ 0x00001000
#define TV_CHSCART 0x00008000
#define TV_CHYPBPR525I 0x00010000
#define CRT1_VGA 0x00000000
#define CRT1_LCDA 0x00020000
#define VGA2_CONNECTED 0x00040000
#define VB_DISPTYPE_CRT1 0x00080000 /* CRT1 connected and used */
#define VB_SINGLE_MODE 0x20000000 /* CRT1 or CRT2; determined by DISPTYPE_CRTx */
#define VB_MIRROR_MODE 0x40000000 /* CRT1 + CRT2 identical (mirror mode) */
#define VB_DUALVIEW_MODE 0x80000000 /* CRT1 + CRT2 independent (dual head mode) */
/* Aliases: */
#define CRT2_ENABLE (CRT2_LCD | CRT2_TV | CRT2_VGA)
#define TV_STANDARD (TV_NTSC | TV_PAL | TV_PALM | TV_PALN | TV_NTSCJ)
#define TV_INTERFACE (TV_AVIDEO|TV_SVIDEO|TV_SCART|TV_HIVISION|TV_YPBPR|TV_CHSCART|TV_CHYPBPR525I)
/* Only if TV_YPBPR is set: */
#define TV_YPBPR525I TV_NTSC
#define TV_YPBPR525P TV_PAL
#define TV_YPBPR750P TV_PALM
#define TV_YPBPR1080I TV_PALN
#define TV_YPBPRALL (TV_YPBPR525I | TV_YPBPR525P | TV_YPBPR750P | TV_YPBPR1080I)
#define VB_DISPTYPE_DISP2 CRT2_ENABLE
#define VB_DISPTYPE_CRT2 CRT2_ENABLE
#define VB_DISPTYPE_DISP1 VB_DISPTYPE_CRT1
#define VB_DISPMODE_SINGLE VB_SINGLE_MODE
#define VB_DISPMODE_MIRROR VB_MIRROR_MODE
#define VB_DISPMODE_DUAL VB_DUALVIEW_MODE
#define VB_DISPLAY_MODE (SINGLE_MODE | MIRROR_MODE | DUALVIEW_MODE)
/* Structure argument for SISFB_GET_INFO ioctl */
struct sisfb_info {
__u32 sisfb_id; /* for identifying sisfb */
#ifndef SISFB_ID
#define SISFB_ID 0x53495346 /* Identify myself with 'SISF' */
#endif
__u32 chip_id; /* PCI-ID of detected chip */
__u32 memory; /* total video memory in KB */
__u32 heapstart; /* heap start offset in KB */
__u8 fbvidmode; /* current sisfb mode */
__u8 sisfb_version;
__u8 sisfb_revision;
__u8 sisfb_patchlevel;
__u8 sisfb_caps; /* sisfb capabilities */
__u32 sisfb_tqlen; /* turbo queue length (in KB) */
__u32 sisfb_pcibus; /* The card's PCI ID */
__u32 sisfb_pcislot;
__u32 sisfb_pcifunc;
__u8 sisfb_lcdpdc; /* PanelDelayCompensation */
__u8 sisfb_lcda; /* Detected status of LCDA for low res/text modes */
__u32 sisfb_vbflags;
__u32 sisfb_currentvbflags;
__u32 sisfb_scalelcd;
__u32 sisfb_specialtiming;
__u8 sisfb_haveemi;
__u8 sisfb_emi30,sisfb_emi31,sisfb_emi32,sisfb_emi33;
__u8 sisfb_haveemilcd;
__u8 sisfb_lcdpdca; /* PanelDelayCompensation for LCD-via-CRT1 */
__u16 sisfb_tvxpos, sisfb_tvypos; /* Warning: Values + 32 ! */
__u32 sisfb_heapsize; /* heap size (in KB) */
__u32 sisfb_videooffset; /* Offset of viewport in video memory (in bytes) */
__u32 sisfb_curfstn; /* currently running FSTN/DSTN mode */
__u32 sisfb_curdstn;
__u16 sisfb_pci_vendor; /* PCI vendor (SiS or XGI) */
__u32 sisfb_vbflags2; /* ivideo->vbflags2 */
__u8 sisfb_can_post; /* sisfb can POST this card */
__u8 sisfb_card_posted; /* card is POSTED */
__u8 sisfb_was_boot_device; /* This card was the boot video device (ie is primary) */
__u8 reserved[183]; /* for future use */
};
#define SISFB_CMD_GETVBFLAGS 0x55AA0001 /* no arg; result[1] = vbflags */
#define SISFB_CMD_SWITCHCRT1 0x55AA0010 /* arg[0]: 99 = query, 0 = off, 1 = on */
/* more to come */
#define SISFB_CMD_ERR_OK 0x80000000 /* command succeeded */
#define SISFB_CMD_ERR_LOCKED 0x80000001 /* sisfb is locked */
#define SISFB_CMD_ERR_EARLY 0x80000002 /* request before sisfb took over gfx system */
#define SISFB_CMD_ERR_NOVB 0x80000003 /* No video bridge */
#define SISFB_CMD_ERR_NOCRT2 0x80000004 /* can't change CRT1 status, CRT2 disabled */
/* more to come */
#define SISFB_CMD_ERR_UNKNOWN 0x8000ffff /* Unknown command */
#define SISFB_CMD_ERR_OTHER 0x80010000 /* Other error */
/* Argument for SISFB_CMD ioctl */
struct sisfb_cmd {
__u32 sisfb_cmd;
__u32 sisfb_arg[16];
__u32 sisfb_result[4];
};
/* Additional IOCTLs for communication sisfb <> X driver */
/* If changing this, vgatypes.h must also be changed (for X driver) */
/* ioctl for identifying and giving some info (esp. memory heap start) */
#define SISFB_GET_INFO_SIZE _IOR(0xF3,0x00,__u32)
#define SISFB_GET_INFO _IOR(0xF3,0x01,struct sisfb_info)
/* ioctrl to get current vertical retrace status */
#define SISFB_GET_VBRSTATUS _IOR(0xF3,0x02,__u32)
/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */
#define SISFB_GET_AUTOMAXIMIZE _IOR(0xF3,0x03,__u32)
#define SISFB_SET_AUTOMAXIMIZE _IOW(0xF3,0x03,__u32)
/* ioctls to relocate TV output (x=D[31:16], y=D[15:0], + 32)*/
#define SISFB_GET_TVPOSOFFSET _IOR(0xF3,0x04,__u32)
#define SISFB_SET_TVPOSOFFSET _IOW(0xF3,0x04,__u32)
/* ioctl for internal sisfb commands (sisfbctrl) */
#define SISFB_COMMAND _IOWR(0xF3,0x05,struct sisfb_cmd)
/* ioctl for locking sisfb (no register access during lock) */
/* As of now, only used to avoid register access during
* the ioctls listed above.
*/
#define SISFB_SET_LOCK _IOW(0xF3,0x06,__u32)
/* ioctls 0xF3 up to 0x3F reserved for sisfb */
/****************************************************************/
/* The following are deprecated and should not be used anymore: */
/****************************************************************/
/* ioctl for identifying and giving some info (esp. memory heap start) */
#define SISFB_GET_INFO_OLD _IOR('n',0xF8,__u32)
/* ioctrl to get current vertical retrace status */
#define SISFB_GET_VBRSTATUS_OLD _IOR('n',0xF9,__u32)
/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */
#define SISFB_GET_AUTOMAXIMIZE_OLD _IOR('n',0xFA,__u32)
#define SISFB_SET_AUTOMAXIMIZE_OLD _IOW('n',0xFA,__u32)
/****************************************************************/
/* End of deprecated ioctl numbers */
/****************************************************************/
/* For fb memory manager (FBIO_ALLOC, FBIO_FREE) */
struct sis_memreq {
__u32 offset;
__u32 size;
};
/**********************************************/
/* PRIVATE */
/* (for IN-KERNEL usage only) */
/**********************************************/
#endif /* _LINUX_SISFB_H_ */
........